電壓監測器設成“接通=1”，當電流超過大約80至100毫安時，電流監測器設成“接通=1”。電壓監測器用來檢查整個跳閘回路的狀態,而電流監測器可用于封閉輸出觸點直到外部觸點斷開電流。上面所說的A型輸出電路的結構圖如下圖所示。其中，a)選用電壓監測器b)選用電流監測器c)無監測

HONEYWELL MICRO SWITCH LSW3K

Honeywell Remote Bulb Temperature Controller T991A 1426

HONEYWELL C437E 1004

HONEYWELL MICRO SWITCH SPLASH PROOF OPD-AR20

HONEYWELL Q624A 1014

Honeywell 621-1151 Input Module (UGC)

Yamatake Honeywell Micro Switch Foot Pedal AFZ-5100

HONEYWELL LIMIT SWITCH LSA1A

SEALED HONEYWELL LSYMC6D

HONEYWELL MPD6HD W/MPV14HD

HONEYWELL MICRO SWITCH DTE6-2RN80

Honeywell Fiber Optic Photoelectric Control FE7B

YAMATAKE-HONEY?WELL SDC101-5G K09 0Y1 DigitroniK ,